
When cosmetic R&D chemists, regulatory specialists, and procurement managers source GHK-Cu (INCI: Copper Tripeptide-1), they frequently encounter two different Chemical Abstracts Service (CAS) registry numbers on supplier documents: CAS 49557-75-7 and CAS 89030-95-5.
Understanding the exact chemical distinction between these two CAS numbers—and how Acetate Salt vs. Free Base (Anhydrous Stoichiometric) forms behave in aqueous cosmetic formulations—prevents regulatory filing mismatches and ensures consistent pH and color performance across production batches.
1. Chemical Distinction: CAS 49557-75-7 vs. CAS 89030-95-5
Both CAS numbers represent the same bioactive metallopeptide complex (Copper Tripeptide-1, Gly-L-His-L-Lys · Cu²⁺), and both share the exact same global INCI name (Copper Tripeptide-1) and EC number (618-276-8). The difference lies in whether the CAS registry entry specifies the acetate counter-ion salt or the counter-ion-free coordination complex:
| Technical Attribute | GHK-Cu Acetate Form (CAS 49557-75-7) | GHK-Cu Free Base / Stoichiometric (CAS 89030-95-5) |
|---|---|---|
| INCI Designation | Copper Tripeptide-1 | Copper Tripeptide-1 |
| CAS Registry Number | 49557-75-7 | 89030-95-5 |
| Chemical Name | Glycyl-L-histidyl-L-lysine copper(II) acetate | Copper, [N2-(N-glycyl-L-histidyl)-L-lysinato(2-)]- |
| Molecular Formula | C14H22CuN6O4 · xC2H4O2 (x ≈ 0.5 – 1.0) | C14H22CuN6O4 (Anhydrous complex basis) |
| Formula Weight | ~463.98 g/mol (Monoacetate basis) | 403.93 g/mol (Free base complex) |
| Typical Acetic Acid Content | 5.0% – 12.0% (Standard Acetate) / ≤ 2.5% (Low-Acetate) | ≤ 0.5% (Typically < 0.05% by Ion Chromatography) |
| Typical Copper (Cu²⁺) Content | 12.5% – 15.0% | 14.0% – 16.0% |
| RP-HPLC Peptide Purity | ≥ 98.0% or ≥ 99.0% | ≥ 99.0% |
| pH in Water (`2 mg/mL`, 25 °C) | 5.5 – 6.8 (Slightly self-buffering near pH 6.2) | 6.0 – 7.5 (Neutral violet-blue solution) |
| Aqueous Solubility (25 °C) | ≥ 100 mg/mL (Instant dissolution) | ≥ 100 mg/mL (Instant dissolution) |
2. Why Both Forms Exist in Peptide Manufacturing
During solid-phase or solution-phase peptide synthesis and subsequent preparative RP-HPLC purification, mobile-phase modifiers and copper complexation buffers determine the final isolated salt state:
- Why Acetate (`CAS 49557-75-7`) Became the Cosmetic Industry Standard: Historically, cosmetic-grade peptides are converted from trifluoroacetate (TFA) salts to acetate salts via ion-exchange chromatography before lyophilization/crystallization. A controlled acetate counter-ion level stabilizes the crystal lattice and naturally buffers a
0.1%–0.2%aqueous solution right around pH 6.0–6.4, which is the exact sweet spot for cosmetic skin compatibility and Cu²⁺ coordination stability. - When Formulators Specify Free Base / Low-Acetate (`CAS 89030-95-5`): High-concentration ampoules (
0.3%–1.0%), fragrance-free prestige serums (where zero trace acetic acid odor is desired), and lyophilized freeze-dried powder cakes often specify the Free Base / Low-Acetate stoichiometric form (`CAS 89030-95-5`), where residual acetic acid is driven below0.5%(typicallyNot Detected – 0.04%on our Batch COA).
3. Impact on Active Dosing & Elemental Cu²⁺ Calculation
When scaling up a skincare formula from lab bench to commercial production, formulators should account for the slight difference in elemental copper density between high-acetate batches and free-base/low-acetate batches:
- At 0.10% w/w (`1.0 g/kg`) of CupraBio GHK-Cu Powder (
Cu ≈ 14.2%), the finished serum contains approximately 142 ppm of coordinated Cu²⁺. - You can model the exact active tripeptide mass, elemental Cu²⁺ ppm contribution, and recommended packaging size for either Acetate (`CAS 49557-75-7`) or Free Base (`CAS 89030-95-5`) directly in our interactive GHK-Cu Formulation & Batch Calculator.
4. Regulatory & Customs Alignment (EU CosIng, US MoCRA & China IECIC)
From a regulatory compliance standpoint:
- Global INCI Uniformity: Regardless of whether your internal purchase specification cites CAS 49557-75-7 or CAS 89030-95-5, the consumer-facing ingredient list (LOI) always declares `Copper Tripeptide-1`.
- Customized COA & SDS CAS Matching: If your company's existing Product Information File (PIF), Cosmetic Product Safety Report (CPSR), or customs broker tariff database is locked to one specific CAS number (49557-75-7 or 89030-95-5), CupraBio supplies the corresponding form and issues the lot-specific COA, 14-section English SDS, and commercial invoice aligned to your registered CAS identifier.
Download our Technical Data Sheet (PDF) to compare full specifications, or request a quotation and sample) specifying your preferred CAS form (49557-75-7 Acetate or 89030-95-5 Free Base).
Need GHK-Cu for your formulation?
COA with HPLC chromatogram, MSDS, and quotation within 24 hours.
Related Technical Guides
What Is GHK-Cu (Copper Tripeptide-1)? Molecular Structure, Stoichiometry & Cosmetic Mechanism Guide
Complete technical guide to GHK-Cu (INCI: Copper Tripeptide-1): tridentate Cu2+ coordination chemistry, 1:1 vs 2:1 stoichiometry facts, CAS 49557-75-7 / 89030-95-5 specs, and cosmetic dosing.
How to Audit a GHK-Cu Bulk Supplier: RP-HPLC Purity vs. UV Assay, Cu2+ Stoichiometry & COA Verification
Six technical checks for cosmetic buyers sourcing bulk GHK-Cu powder: why RP-HPLC chromatograms beat UV-Vis assays, verifying 10-16% Cu2+ stoichiometry, lab solubility tests, and SGS verification.
GHK-Cu Cosmetic Formulation & Stability Guide: pH Window (5.5-7.5), Chelator Incompatibility & Cold-Process Addition
Why do copper peptide serums turn green or lose viscosity? Master GHK-Cu formulation stability: pH 5.5-7.5 buffering, avoiding EDTA/L-ascorbic acid/carbomers, <40°C addition, and storage rules.
